Gas Furnace Maintenance In Geneva, IL

Gas Furnace Maintenance

Are you looking for gas furnace maintenance in Geneva, IL ? Our heating and furnace service technicians have years of experience working on furnaces like yours in Geneva, IL. has service vehicles on call that are fully equipped with the tools and parts necessary to get your furnace back up and operating.

We offer gas furnace maintenance and maintenance agreements to keep your heating system running great. You can rely on to advise you properly and to do excellent work promptly. Ask us about maintenance agreements for your high efficiency furnace today.

We provide gas furnace Maintenance Agreements in Geneva, IL

Get Your Quote Today

Furnace Report: Furnace Report • Inducer NA • Clean Flame Sensor Na • Inspect Blower Motor No Issues • Inspect Wiring No Issues • Inspect Burner Na • Inspect Orfices For Blockage No Issues • Carbon Monoxide Test 0ppm Found • Inspect Chimney Na • Inspect Pressure Switch Lines Na • Test Sequence Of Operation No Issues • Inspect Heat Exchanger Na • Check Ignitor Na • Check/replace Filter Replaced Air Filter • Test Gas Shut Off Na • Test Thermostat For Proper Operation No Issues
Kelly , K. Geneva, IL
01-21-2022

Upon Arrival Pre Clean Up Start-up Operations Are Good On Both Furnaces. Motors For Both Furnaces Operating Well Within Operating Amp Rate. Switches Are Good, The Interior Of Furnace In Great Condition, Recommend Changing Filters At The End Of The Month. Also Offered Humidifier Maintenance & Homeowner Accepted. Cleaned Up Motors Housing, Interior Furnace, Flame Sensor & Burner Assembly. Furnaces Were Manufactured In May 2015. Filter Size 20x25x5 Humidifier Maintenance And Cleaning Disassemble And Inspect Aprilaire Humidifier -Clean Drain Assembly -Clean Distribution Tray -Clean Water Feed Tube -Verify Water Flow, Clean Orifice -Clean Or Replace Drain Tube As Needed -Verify 24v Control Operation -Replace Media Filter Set Manual Controls @ 35% For Winter Opperaion. Verify Automatic Control Set In WiFi Stat
Charles, L. Geneva , IL
10-13-2021

Furnace Report: Furnace Report Boiler • Inducer Amps MNF/ - Test/ NA • Clean Flame Sensor Cleaned Sensor • Blower Motor Capacitor MNF/ - Test/ NA • Inspect Wiring No Issues • Inspect Burner No Rust • Inspect Orifices For Blockage Cleared All Ports • Carbon Monoxide Test 0ppm Found • Inspect Chimney No Issues • Inspect Pressure Switch Lines NA • Test Sequence Of Operation No Issues • Inspect Heat Exchanger No Issues • Check Ignitor Spark Cleaned • Check/replace The Filter Replaced Air Filter On Air Handler • Test Gas Shut Off No Issues • Test Thermostat For Proper Operation No Issues
Bill , K. Geneva, IL
10-15-2022

Upon Arrival Pre Clean Up Start-up Operations Are Good. Operating Amps On Motors Well Within Operating Amp Rate. The Switches Are Good. The Flame Sensor Was Dirty & So Was The Burner Assembly. Cleaned Up Burner Assembly, Flame Sensor, Housing Motors & Interior Of The Furnace. The Current Filter Is Still Good, I Left A New Filter On The Side Of The Furnace. Humidifier Barely Been Used But Still In Good Operation Annual Furnace Preventative Maintenance: Your Fall Preventative Maintenance Includes - Clean Burner Assembly - Clean Flame Sensor - Inspect Heat Exchanger - Check Igniter - Test Safety Circuit - Carbon Monoxide Test - Check Sequence Operations - Inspect Blower Motor And Cage - Measure For Correct Airflow - Tighten Electrical Connections - Measure Volts/amps On Motors - Change Filter
Marsha , E. Geneva , IL
10-20-2021

Furnace Report: Furnace Report • Inducer 1.4 @ .89 • Clean Flame Sensor Cleaned Sensor • Inspect Blower Motor No Issues • Inspect Wiring No Issues • Inspect Burner No Issues • Inspect Orfices For Blockage Cleared All Ports • Carbon Monoxide Test 0ppm Found • Inspect Chimney No Issues • Inspect Pressure Switch Lines No Issues • Test Sequence Of Operation No Issues • Inspect Heat Exchanger No Issues • Check Ignitor No Issues • Check/replace Filter Air Filter Looks Good • Test Gas Shut Off No Issues • Test Thermostat For Proper Operation No Issues
Anita , P. Geneva, IL
02-01-2022

Furnace Report: Furnace Report Furnace 1st Floor • Inducer Amps MNF/ - Test/0.8A • Clean Flame Sensor Cleaned Flame Sensor • Blower Motor Capacitor MNF/ - Test/ N/A Relay • Inspect Wiring All Wiring Is Good • Inspect Burner Cleaned And Cleared Burners • Inspect Orifices For Blockage No Blockages • Carbon Monoxide Test No Issues • Inspect Chimney Chimney/exhaust Is Venting Properly • Inspect Pressure Switch Lines Cleared Pressure Switch Lines • Test Sequence Of Operation Sequence Of Operations Is Good And In Order • Inspect Heat Exchanger No Cracks, Clean Flame • Check Ignitor Ignitor Is All Good • Check/replace The Filter Recommend Replacing Filter. Very Dirty • Test Gas Shut Off No Issues • Test Thermostat For Proper Operation Thermostat Turns On Call No Issues Furnace Report: Furnace Report Furnace 2nd Floor • Inducer Amps MNF/ - Test/ 0.7A • Clean Flame Sensor Cleaned Flame Sensor • Blower Motor Capacitor MNF/ - Test/ N/A Relay • Inspect Wiring All Wiring Is Good • Inspect Burner Cleaned And Cleared Burners • Inspect Orifices For Blockage No Blockages • Carbon Monoxide Test No Issues • Inspect Chimney Chimney/exhaust Is Venting Properly • Inspect Pressure Switch Lines Cleared Pressure Switch Lines • Test Sequence Of Operation Sequence Of Operations Is Good And In Order • Inspect Heat Exchanger No Issues • Check Ignitor Ignitor Is All Good • Check/replace The Filter Recommend Replacing Filter. It’s Dirty • Test Gas Shut Off No Issues • Test Thermostat For Proper Operation Thermostat Turns On Call No Issues
Charles & Nicole, L. Geneva, IL
10-22-2022

Furnace Report: Furnace Report • Inducer Amps MNF/ - Test/ • Clean Flame Sensor • Blower Motor Capacitor MNF/ - Test/ • Inspect Wiring • Inspect Burner • Inspect Orifices For Blockage • Carbon Monoxide Test • Inspect Chimney • Inspect Pressure Switch Lines • Test Sequence Of Operation • Inspect Heat Exchanger • Check Ignitor • Check/replace The Filter • Test Gas Shut Off • Test Thermostat For Proper Operation
Bryan , V. Geneva , IL
10-15-2022