Urnace Report:
Furnace Report
Furnace 1st Floor
• Inducer Amps MNF/ - Test/2.7A
• Clean Flame Sensor No Flame Sensor/ Pilot
• Blower Motor Capacitor MNF/ - Test/
[email protected]
• Inspect Wiring All Wiring Is Good
• Inspect Burner Burners Are Very Rusty. Cleaned Burners They Are Free Of Obstruction
• Inspect Orifices For Blockage No Blockages
• Carbon Monoxide Test No Issues
• Inspect Chimney Chimney Is Venting Properly
• Inspect Pressure Switch Lines Cleared Pressure Switch Lines, No Obstructions
• Test Sequence Of Operation Sequence Of Operations Is Good And In Order
• Inspect Heat Exchanger Heat Exchanger Is 18 Years Old, Could Begin To Crack
• Check Ignitor No Issues
• Check/replace The Filter Filter Is Clean
• Test Gas Shut Off No Issues
• Test Thermostat For Proper Operation Thermostat Turns On Call No Issues
Furnace Report:
Furnace Report
Furnace 2nd Floor
• Inducer Amps MNF/ - Test/1.3A
• Clean Flame Sensor N/A Pilot
• Blower Motor Capacitor MNF/ - Test/
[email protected]
• Inspect Wiring All Wiring Is Good
• Inspect Burner Burners Are A Little Rusty, Still Cleaned Them And They Are Free Of Obstruction
• Inspect Orifices For Blockage No Blockages
• Carbon Monoxide Test No Issues
• Inspect Chimney Chimney Is Venting Properly
• Inspect Pressure Switch Lines Cleared Pressure Switch Lines No Obstructions
• Test Sequence Of Operation Sequence Of Operations Is Good And In Order
• Inspect Heat Exchanger Due To Age Could Possible Begin To Be Damaged/crack
• Check Ignitor PILOT
• Check/replace The Filter REPLACED FILTER
• Test Gas Shut Off No Issues
• Test Thermostat For Proper Operation Thermostat Turns On Call No Issues
Danish , Y. Elmhurst , IL10-15-2022